Tips For Installing an Outdoor Lighting System

If you are looking for a new way to accentuate your outdoor space, you may be considering installing an outdoor lighting system. There are many options available when choosing the right lighting for your needs. You can choose from high-voltage or low-voltage landscape lighting systems, as well as custom outdoor lighting designs.

Installing a low-voltage landscape lighting system

Installing a low-voltage landscape lighting system is a great way to light up your outdoor living space. It is safer to handle than standard “line voltage” lights, and it uses less energy. However, it is important to remember that it still carries some risks.

To begin, you should consult a lighting kit to figure out the layout of your outdoor lighting system. This will help you figure out the amount of wire you will need. You should space your fixtures a minimum of six to 10 feet apart.

Outdoor Lighting System

Outdoor Lighting System

Unless you are very experienced, you may not want to attempt installing a low-voltage lighting system yourself. That said, if you’re in a rush, consider hiring a professional lighting company. Typically, a high-quality professional will stand by their work and will fix any problems that occur.

One of the most important pieces of a low-voltage landscape lighting system involves wiring. The wires between your fixtures should be 12-gauge wire.

Installing a high-voltage landscape lighting system

If you are planning to install a high-voltage landscape lighting system, you may need a few tips to ensure that you make a successful installation. There are three major steps involved: laying the wires, installing the transformer, and programming the timer.

The first step is to lay out the light fixtures. These are typically placed along driveways and walkways. Once you have the lights laid out, you can start burying the wires.

Before you begin burying the wires, you will need to consult with your local utility company. They can help you map your yard and locate the underground utilities. This will help you avoid damage to pre-existing utilities.

Next, you will need to cut the sod around the light fixture. Use a flat-nosed shovel to create a cut that is at least two inches deep. You can use treated lumber or cedar for the base of the lights. Make sure you cut the sod at the same spacing between each fixture. This will prevent hot spots.

Installing a custom outdoor lighting system

Adding a custom outdoor lighting system to your backyard can add a new dimension to your exterior. You can even enhance security by installing motion-activated fixtures. Using a good quality lighting system will ensure a lifetime of use.

Before starting, consider your needs. Some factors that will affect the cost of your project include the type of lights you choose, their features, and the size of your yard.

Outdoor Lighting System

Outdoor Lighting System

One important feature to look for in an outdoor lighting system is a low voltage system. Low voltage lighting is safe and a great way to highlight your landscape. If you decide to install a low voltage system, you should also install a transformer and connect the wiring to it.

One of the most important factors to consider is the Underwriters Laboratories (UL) rating. This is a rating that tells you a lot about a particular lighting fixture. The three most common ratings are UL dry, UL damp, and UL wet.

Maintaining your outdoor lighting system

In order to keep your outdoor lighting system working, you will need to perform regular maintenance. Failure to do so can result in damage, burnouts, and the loss of brightness. If you are not sure how to properly care for your lights, it may be a good idea to hire a professional to do it for you.

When it comes to outdoor landscape lighting, the weather can be the biggest determinant of what happens to your fixtures. During the winter, it is important to make sure your system is in good working condition. Snow and ice can be dangerous, and wintry drift can affect electrical wires.

In addition to the weather, other factors can impact the operation of your lighting. For instance, plants can grow over your fixtures and block light. Furthermore, dirt and debris can build up and diminish light output. You can also accidentally knock a fixture out of place, causing it to be ineffective.

Illuminated Concepts Inc. – OC Lights
23011 Moulton Pkwy B-5, Laguna Hills, CA 92653, United States
+1 949-455-9914